SYLGARD™ 170 Silicone Elastomer Kit

SYLGARD 170 also known as Dow Corning SYLGARD 170 Silicone Elastomer is a two-part, 1:1 mix, black, general purpose encapsulant with good flowability, long working time and flame resistance, it is also UL and Mil Specified.

SYLGARD™ 170 Silicone Elastomer Kit

Categories Adhesives and Sealants, Silicone Adhesives Brands: DOWSIL™ High-performance Silicones & Silicone-based products.

Dow SYLGARD™ 170 Silicone Elastomer is a two component, room temperature and heat curing, encapsulant that is used as a protective coating for electrical applications such as power supplies, transformers, sensors, amplifiers, and connectors. It provides good flowability, moderate thermal conductivity, low viscosity, long working times, and flame resistance. 1:1 mix ratio. 0.9 kg Kit.

Applications

SYLGARD™ 170 Silicone Elastomer is suitable for use as an encapsulant or potting material.
Power supplies
Connectors
Sensors
Industrial controls
Transformers
Amplifiers
High voltage resistor packs
Relays

Features

Low viscosity
Long working time
Room temp or heat accelerated cure
Moderate thermal conductivity
UL 94 V-0 and MIL1 Spec tested to MIL-PRF-23586F (specifically listed material numbers only)
Enhanced flow and fill in narrow spaces and around complex geometries
Rapid, versatile cure processing controlled by temperature
Provides stress relief in applications where hard, rigid encapsulants can cause damage during thermal cycling
Can be considered for uses requiring added flame resistance and MIL Spec applications
Approved for railways standard EN45545-2: R22/R23/R24/R25/R26 – HL3